Home› dbx User Forum› dbx Archive Threads› DriveRack PA2
Options

Input Mixer? Mono config?

seconds_awayseconds_away Posts: 4
in DriveRack PA2

I'm going to buy another driverack, it would be a venu360 but $$$ is an issue, I'm wondering if a PA2 will do what I need.
A couple of questions:

  • After reading the user manual, it appears as though the PA2 doesn't have an input mixer; is that correct?
  • If the PA2 is configured for mono and both inputs are used, will the inputs be summed, or will one input be ignored?

Comments

  • Options
    HARMAN_EEldeHARMAN_EElde Posts: 1,366
    edited May 2020

    Make sure you post in the newer section for dbx questions, and not the archives, there are not monitored very actively any longer.

    To answer your questions though

    That is correct, no input mixer.

    They will not be summed no, the Left input becomes Mono in.

  • Options
    seconds_awayseconds_away Posts: 4

    Thank you, that helps. My new purchase will have to be a Venu360... might just be a little while longer before I get there.
    Also thanks for pointing out that I posted in the archives, it wasn't intentional.

Sign In or Register to comment.