Ui16 not keeping AFS2 profile

cbugeja

I noticed that when turning on the mixer, the only settings that are not automatically remembered are the frequencies of the automatic feedback suppressor. Every time I turn on the mixer I have to go to the automatic feedback suppressor settings and load the user profile. This is not feasible as this mixer is installed as a set-up-and-forget system in a church setting. Most of the time other people turn the system on and they do not have access to the mixer settings.

After setting the AFS2 using the "Fixed" option, I saved the profile, then turned on the "Live" option as per instructions. I then saved a Snapshot. When the mixer turns on it automatically loads the correct Snapshot, remembers the "Live" option for AFS2, but will not automatically load the AFS2 user profile with the frequencies that need to be attenuated by the AFS2.

Is there something I am missing? Is there a way how to make this profile load automatically?

Thanks a lot for your help.

vsaliba

I have the same problem. After setting the AFS, I would need to go through the AFS setup if I switch the UI16 off.