Soundcraft UI24r, using AUX 9 & 10 in OBS
phill
Posts: 2
Hi,
I'm trying to do a mix for OBS on aux 9 & 10. Is it possible to route this over USB? I couldn't figure it out when I was looking earlier!
0
Comments
In the official default status, aux 9 and 10 are not patched to the DAW output.
However there is a hidden trick.
Their default pathing doesn't have DAW OUTPUT PATCHING feature but it's actually implemented then you can write the OFFLINE FILE ( JSON text format ) to change these patching.
For example, this
https://www.dropbox.com/scl/fi/c2qjjzt29lohi4bkfuugq/onlyUSBDAW_Aux9_10-instead-master.json?rlkey=5a9cbzpn0yguxr5diil3hsslo&dl=0
This is a text file what has description that of
{
"schema" : "6",
"type" : "8ch",
"flavour" : "1",
"usbdaw.1.src" : "a.9",
"usbdaw.0.src" : "a.8"
}
Anyway it replaces the master LR for the DAW out to the Aux9 and 10.