Hey gang, last question to ask you guys (I hope). Seems like I have a defective speakon connection on the EX2000 Top speakers. I have to wiggle the connection to get it to work but then it cuts out, so I have to go and try to wiggle it again. I'm guessing it;s the speakon female on the speaker as I've tried different cables. Probably the contact is warn out... Do any of you have any info on what part I need to replace this? Is it a standard 4 pole speakon female.. I've PM'd Dra who advised me to post here as he may not be available.. Any info or specs on the type of connection would be great..
Aren't there 2 Speakons on the back of the speaker? If you have a switch, that changes the speaker from fullrange to Bi-amp like mine, then they should be paralleled... BUT most any female NL4 connector should be able to fill the bill...(I'd avoid the big round one though)
G
Aren't there 2 Speakons on the back of the speaker? If you have a switch, that changes the speaker from fullrange to Bi-amp like mine, then they should be paralleled... BUT most any female NL4 connector should be able to fill the bill...(I'd avoid the big round one though)
G
Yes there are, but I only have 2 pole cables.... I really should look at getting 4 pole but as of right now, It would be cheaper to use both speakons. Thanks for the tip on anyone.. I'll check our local audio store for them..
Comments
Thanks again.
G
Yes there are, but I only have 2 pole cables.... I really should look at getting 4 pole but as of right now, It would be cheaper to use both speakons. Thanks for the tip on anyone.. I'll check our local audio store for them..
:?:
Dennis