I did this with my new 12\" coaxial tops, (as you can see in the pictures) and I was able to store High precision setups for -0-, A, C, and D, precurves in about 10 minutes, and that includes a couple passes @ -0- (flat) to get as flat a response as possible using the PEQ's with no \"GEQ\" equalization.
1. Will running the amp in bridge mode give me any more... db's, loudness, volume... (you know what I mean)
2. Is this a safe thing to try, safe for the amp and/or the speakers, where the spec sheet does not list a rating for a 4ohm load?