Hi DJG. The answer is no, RP255 does not have this option. On my RP365 I made external drums pedal, but it seems this is not possible on 255. Have a look https://proforums.harman.com/digitech/discussion/125410/digitech-rp365-external-drums-pedal
I feel silly asking this... but am I searching wrong?
I cant get any search to return results in the top search bar
Based on specs, if you go with the PRX815 you will have the same app to control both speakers, giving you better overall control of them.
EON615 specs Freq response 50-20, peak watts 1000, Max SPL 127, weight 39 lbs.
PRX815 specs Freq response 58-17, peak watts 1500, Max SPL 137, weight 46 lbs. DBX limiter built in.
PRX will give you more power and Db if you are pushing your EONs to keep up. You will also use the same speaker management tool for your sub and tops. The extra power and Db will also be better for the outside parties but that trade off would depend on how often you are outside where more is better. You can always turn down but when you hit max volume and clipping amps you can't turn up anymore.
I just purchased 2 PRX835 and 2 PRX818 and they really perform well. I run sound for a few bands with the same drummer. 5 piece rock, 4 piece southern rock, and a 3 piece acoustic. The 835 are three way drivers but a biamped cabinet so the mids are much more clear then with a 2 way. Great for vocal clarity.
I just purchased one of these wireless travel routers. I have it plugged into the back of my power supply so I can have my own private wifi network between my Ipad and my speakers everywhere I go.
We captured the entire process in the Zoom Rooms training video here:
Because the app is installed directly on to the panel it will not show up in TP Design
Here is the command that is embedded on the demo TP5 file to launch - sent to the loop back port 0 device.
Yes, you can use the internal address 0:8 (Panel Setup:Connection Status). Your button should be of type multi-state bargraph, and mine has 9 states to match the options for that internal button.
States 1,8, and 9 should contain your PANEL IS NOT ONLINE message and color. All other states are transparent with no text in my implementation.
There is no internal page for this, or a mechanism to trigger a flip on loss of connection. I typically put a full width button at the top or bottom of each page. In my case, I leave it transparent and passthru under normal conditions so as not to reduce real estate. There is nothing stopping you from making it full screen, but it may get in your way when making edits to the panel file. I think this achieves the same outcome asked by the OP, but just a work around to achieve the effect.
Hi Claude, I've addressed this in your Trio+ thread.
Sure, that's a 3-pin phoenix connector. https://www.google.com/search?q=3+pin+phoenix